Ultimate-speed UMK 10 A1 Bedienungsanleitung PDF herunterladen (Seite 43)

43

GB

4. Connection with valve adapter

(10):

- Push the respective valve

adapter into the connection

valve hole (7).

- Secure the valve adapter in

the connection valve (7):

push the tensioning lever (8)

towards the connection valve

(position



).

- Plug the valve adapter into

thevalveontheinﬂatable

item (remove the valve cap

ontheinﬂatableitembefore-

hand if necessary).

Switching on/off:

5. Switch on the device:

On/off switch ( 6) in “I” position.

6. Switch off the device when the desired

llpressureisreached:

On/off switch ( 6) in “0” position.

7. Disconnect the cigarette lighter plug

(

5).

Disconnecting the connection valve:

8. Connection without valve adapt-

er (10):

Open the connection valve (7)

tensioning lever (8) and remove

itfromthevalveontheinﬂat-

able item.

Connection with valve adapter

(10):

Remove the valve adapter from

thevalveontheinﬂatableitem.

Open the connection valve (7)

tensioning lever (8) and remove

valve adapter.

Air can escape from the valve on the

inﬂatableitemwhentheconnection

valve is released. Ensure that the

connection valve is removed quickly.

The manometer is not calibrated.

Afterinﬂatinginﬂatableitemson

which incorrect pressure may be

dangerous (e.g. car tyres), a spe-

cialist unit with a calibrated device

should therefore be visited.

Operation

Operating instructions

The device is not suitable for continuous

operation.

It has been designed to generate air pres-

sure not air volume.

• Forlarge-volumeitems,pleasedonot

operate the device for longer than 5

minutes without interruption, in order

to prevent overheating and damage to

the device. Then allow it to cool for at

least 20 minutes.

 Werecommendinitiallyllingalarge-

volume item with air in order to then

generate the desired pressure with the

device.

• Shouldyourequireapressuregreater

than 3 bar for a car tyre, do not use

the device for longer than 3 minutes

without interruption. Then allow it to

cool for at least 20 minutes.

Air pressure test

The device does not need to be

connected to the cigarette lighter in

order to measure the air pressure.

1. Connect the connection valve (7) (see

“Initial operation”).

2. Read off the air pressure on the ma-

nometer display (2).

3. Disconnect the connection valve (see

“Initial operation”).

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 49 50

Kommentare zu diesen Handbüchern

Keine Kommentare